Wisproof Coat

Wisproof Coat is a liquid waterproofing based on water-based synthetic resin with high resistance to UV exposure. Its formulation is designed to provide optimal protection, keeping surfaces well-protected and resistant to damage even under prolonged sunlight exposure.

Easy to Apply

The liquid texture allows for easy application and helps create an even protective coating layer.

All-Weather Resistance

Provides optimal protection against heat, rain, and changing weather conditions.

UV Resistant

Designed to withstand UV exposure, keeping the coating strong and resistant to degradation over time.

Type	Liquid
Color	Grey
Packaging	20 kg
Coverage Area	1 kg/m²

Ensure the concrete surface is clean and free from dust, oil, moss, and any loose cement residues. Repair cracks or holes using repair mortar, then allow it to dry. Before application, the surface should be in a Saturated Surface Dry (SSD) condition with no standing water to ensure optimal adhesion.

1. Ensure the concrete surface is clean and free from dust, oil, moss, and any loose cement residues. Repair cracks or holes using repair mortar, then allow it to dry. Before application, the surface should be in a Saturated Surface Dry (SSD) condition with no standing water to ensure optimal adhesion.

Mix the waterproofing material with approximately 10% clean water and apply evenly over the entire surface. This primer layer helps seal concrete pores and improves the adhesion of subsequent coats. Allow it to dry until touch-dry (approximately 1–2 hours).

2. Mix the waterproofing material with approximately 10% clean water and apply evenly over the entire surface. This primer layer helps seal concrete pores and improves the adhesion of subsequent coats. Allow it to dry until touch-dry (approximately 1–2 hours).

Apply the waterproofing material without dilution in a uniform vertical direction (top to bottom). This layer forms the primary barrier against water penetration. Allow it to dry for 2–4 hours.

3. Apply the waterproofing material without dilution in a uniform vertical direction (top to bottom). This layer forms the primary barrier against water penetration. Allow it to dry for 2–4 hours.

Apply a second coat without dilution in a horizontal direction (left to right). This cross-application technique ensures complete coverage of surface pores, providing maximum protection against leakage.

4. Apply a second coat without dilution in a horizontal direction (left to right). This cross-application technique ensures complete coverage of surface pores, providing maximum protection against leakage.

After application is completed, allow the coating to fully cure for 24–48 hours. Then flood-test the area with water at a depth of 3–5 cm and mark the water level to ensure no water loss occurs before proceeding with finishing works.

5. After application is completed, allow the coating to fully cure for 24–48 hours. Then flood-test the area with water at a depth of 3–5 cm and mark the water level to ensure no water loss occurs before proceeding with finishing works.