Polyshield DIY ECO is a premium aluminum foil bubble insulation designed to reflect up to 97% of radiant heat. With a foil thickness of 9 microns, it provides effective thermal protection for both project and retail applications. Polyshield DIY ECO is also equipped with eyelets, making it easy for self-installation.
.png)
Remains durable and performs optimally even under heat, rain, and strong winds.
Polyshield helps reduce energy consumption while supporting environmental sustainability.
Reflects up to 97% of radiant heat, helping maintain a more stable and comfortable indoor temperature.
Reduces air conditioning workload, leading to lower energy consumption and electricity costs.
Made from pure aluminum foil without asbestos, reducing the risk of respiratory issues and lung disease.
The integrated aluminum foil and bubble layer allow for quicker and more efficient installation.
1. Measure the length and width of the area where the Polyshield DIY insulation will be installed.
2. Insert cable ties through the eyelets on the Polyshield sheet. Hook the cable ties onto the roof frame, but do not tighten them immediately. Keep them slightly loose until all sides are properly positioned, then place the Polyshield onto the prepared area.
3. Once all cable ties are attached to the frame, tighten them gradually and alternately to ensure the Polyshield is evenly stretched and does not sag in the middle.
* *If installing more than one sheet, allow an overlap of approximately 5 cm between sheets.
* *Seal the joints using aluminum tape along the overlapping edges.
Bahasa
